Superior WCT4920 20" EPA-Certified Wood-Burning Fireplace

WCT4920 Overview

The Superior WCT4920 is the Signature Series EPA-certified wood-burning fireplace with the broadest customization options in the Superior EPA lineup. Powerful non-catalytic combustion and variable air control deliver extended burns from a 2.0-cubic-foot insulated firebox that accepts up to 19-inch logs. The fireplace ships as a firebox shell - a Facade and a Door must be ordered separately to complete the installation. Choose from three facade styles (Louvered Arch, Clean Face Square with HeatFlo, or Louvered Square) and three door styles (Steel Square Pane, Smooth Steel Arched, or Cast Iron Arched) for a total of nine facade/door combinations.

Standard equipment includes white smooth refractory panels with integrated ash lip, steel log retainer, efficient air-wash system, double air combustion control, an outside air adapter and outside air kit, and a heat-activated 200-cfm variable-speed blower with time-delayed heat distribution. EPA variable-rate certified, up to 55,000 BTU and heating up to 1,500 square feet. Note: the FCFSOBLK Clean Face Square facade option REQUIRES the F3790 HeatFlo Convection Kit ($674) for proper performance - if that facade is selected, the HeatFlo Kit must be ordered as well. Optional thermostatically-controlled Forced Air Kit available (maximum three outlets). Approved for use with the IHP Brand 6-inch Snap-Pak insulated chimney.

Chimney sold separately. These EPA-compliant fireplaces require Superior Snap-Pak insulated chimney (IHP-brand model Snap-Pak). Most models use 6-inch Snap-Pak; the WCT6940 catalytic model uses 7-inch Snap-Pak. Chimney sections, elbows, terminations, and roof flashing must be ordered separately. Contact Fireplace Insider for chimney sizing assistance.

Important EPA notice: The optional Forced Air Heating Kit was not included in the EPA emissions testing for this fireplace, and per Innovative Hearth Products it cannot be sold as EPA certified when the Forced Air Kit is installed. If your jurisdiction or installation requires maintained EPA certification (such as a Washington state installation, or any installation subject to EPA Phase II compliance), do not select the Forced Air Heating Kit option.

Key Features

• 20-inch EPA-certified wood-burning fireplace, Signature Series
• Non-catalytic combustion-controlled wood burner
• EPA variable-rate certified high-efficiency wood heater
• Up to 55,000 BTU, heats up to 1,500 sq. ft.
• 2.0 cubic foot insulated firebox accepts up to 19-inch logs
• REQUIRED Facade selection (3 styles to choose from)
• REQUIRED Door selection (3 styles to choose from)
• 9 total facade/door combinations available for customization
• FCFSOBLK Clean Face Square facade requires HeatFlo Kit
• White smooth refractory panels with integrated ash lip
• Steel log retainer included
• Efficient air-wash system keeps glass clean
• Double air combustion control
• Outside air adapter and outside air kit included
• Heat-activated 200-cfm variable-speed blower with time-delayed distribution
• Air combustion control with air boost for faster wood ignition
• Optional F3790 HeatFlo Convection Kit
• Optional Forced Air Heating Kit (note: voids EPA certification when used)
• Uses 6-inch IHP Snap-Pak insulated chimney (sold separately)
• 20-year limited warranty (Innovative Hearth Products)

Specifications

Warranty

The Superior WRT/WCT EPA Compliant Wood-Burning Fireplaces carry Innovative Hearth Products' 20-year limited warranty on the firebox body and ceramic glass against thermal breakage. Removable air tubes are warranted for 7 years from installation. Optional blowers and remote controls are warranted for 1 year. Coverage begins at the date of installation and is non-transferable. Damage from abuse, accident, improper installation, normal wear, chimney fires, burning unapproved fuels, or unauthorized modification is not covered. Proof of purchase required.

EPA Certification: These fireplaces are EPA-certified and must be installed and operated according to manufacturer instructions to maintain certification. The optional Forced Air Heating Kit was not included in EPA emissions testing, and using it voids the EPA certification per IHP. Buyers in jurisdictions with EPA certification requirements should not select the Forced Air Heating Kit option.

Downloads

• Snap-Pak Smart Sheet
• Forced Air Duct Instruction Sheet
• Product Information (see Superior site)