Kingsman ZCV42 42" Zero Clearance Clean View Direct Vent Gas Fireplace
Kingsman
The Kingsman ZCV39 is a 39" zero-clearance direct vent gas fireplace, the mid-size unit in the ZCV Clean View family. The Clean View design hides the louver behind a flush bezel so the firebox reads like a single uninterrupted opening, with the safety screen barrier mounted inside the unit. Both the millivolt and Proflame 1 IPI ignition systems will operate during a power failure, with Hi/Low heat and flame adjustment on the SIT valve.
At 39 3/8" W x 37 11/16" H x 18 7/16" D, the ZCV39 fits a 39 1/2" wide framing opening and outputs 25,000 BTU on natural gas in tempered configuration, stepping up to 28,000 BTU NG and a 63%+ FE rating in the Ceramic glass H configuration. The chase may be vented for cool-touch walls; minimum vented-chase enclosure height is 72". Four brick liner choices and three surround styles are available. Mobile home, bedroom, and bed-sitting room approved.
| Product Type | Direct Vent Gas Fireplace - Clean View |
| Series | Kingsman ZCV Clean View |
| Model | ZCV39 |
| Size | 39" |
| Glass Options | Tempered (standard) or Ceramic Heater (H configuration) |
| BTU Input - Natural Gas | 25,000 max / 16,750 min (Tempered) |
| BTU Input - Propane | 25,000 max / 20,000 min (Tempered) |
| BTU Input - Ceramic H Configuration | 28,000 NG / 29,000 LP |
| Efficiency Tempered (FE P.4.1-02) | 52.35% MV / 54.24% IPI |
| Efficiency Ceramic Heater (FE P.4.1-02) | 63.81% MV / 66.17% IPI |
| Viewing Area | 33" W x 28 9/16" H |
| Fireplace Dimensions | 39 3/8" W x 37 11/16" H x 18 7/16" D |
| Framing Dimensions | 39 1/2" W x 37 7/8" H x 18 1/2" D |
| Venting | 4"/7" Flex or 4" x 6 5/8" Hard Pipe; Power Vent compatible |
| Ignition Options | Millivolt SIT (standard) or Proflame 1 IPI |
| Min. Enclosure Height (Vented Chase) | 72" |
| Listings | ANSI Z21.50 / CSA 2.22, Mobile Home Approved, Bedroom Approved, Power Vent Compatible |
| Country of Manufacture | Canada (R-Co. Inc., Winnipeg, Manitoba) |
| Warranty | Kingsman Limited Lifetime |
Kingsman Limited Lifetime Warranty. The heat exchanger, combustion chamber, and burner are warranted against defects in materials or workmanship for as long as the unit is owned by the original purchaser at the original installation site. Coverage applies only when the unit is installed inside the continental United States, Alaska, Hawaii, or Canada, in accordance with the printed installation instructions and applicable building codes.
During the first year after installation, Kingsman provides replacement parts and labor for any component found defective in materials or workmanship, with prior approval and through an authorized Kingsman dealer. Accent light bulbs, gasketing, and paint are excluded from the one-year coverage. Beyond year one, the Limited Lifetime coverage is parts only; labor, freight, and handling are not covered.
The warranty does not cover damage from accident, abuse, negligence, misuse, riot, fire, flood, Acts of God, corrosive atmospheres (chlorine, fluorine, etc.), unauthorized alteration or repair, improper installation or component matching, or failure to perform proper maintenance. The warranty is non-transferable and applies only to the original purchaser at the original installation site.